Short description

A compact 200 × 200 mm industrial-style tool board panel with 9 × 9 mm square holes, 38 mm center spacing and four M4 mounting holes. Designed as a printable workshop organization panel, hook compatibility test plate or modular wall-mounted tool holder base.

Industrial-style 200 × 200 mm square-hole tool board panel designed for workshop organization, pegboard testing and modular tool-holder setups.

This model is a compact 3D printable tool board inspired by industrial perforated workshop panels. It uses a 9 × 9 mm square hole pattern with 38 mm center-to-center spacing, making it useful for testing tool hooks, wall-mounted holders, custom 3D printed accessories and workshop storage layouts.

The panel is designed as a thin 1.5 mm functional front plate, so it behaves more like a real metal tool board than a thick plastic wall block. This makes it especially useful when testing hooks and accessories that are designed for thin perforated panels. The model also includes four M4 mounting holes near the corners for screw mounting to a wall, board, cabinet, test rig or workshop surface.

This is a practical model for anyone building a custom garage wall, tool wall, maker space, 3D printing station, pneumatic tool storage area or small workshop organization system.

Main features

200 × 200 mm compact tool board panel
25 square mounting holes
9 × 9 mm hole size
38 mm center-to-center spacing
5 × 5 hole layout
M4 mounting holes in all four corners
Thin 1.5 mm functional front plate
Raised/reinforced screw areas around the mounting holes
Good for testing hooks before making a larger tool wall
Useful for custom 3D printed holders, garage storage and workshop organization
Easy to print flat on most modern FDM printers
Designed for functional use, not just decoration

Dimensions

Overall size: 200 mm × 200 mm
Functional panel thickness: 1.5 mm
Maximum height at mounting bosses: approximately 5 mm
Hole size: 9 mm × 9 mm
Hole pattern: 5 × 5
Number of square holes: 25
Hole center spacing: 38 mm
Hole center positions from edge: 24 / 62 / 100 / 138 / 176 mm
Mounting holes: 4 × M4
Recommended screw type: M4 countersunk or pan-head screw depending on your setup

Suggested uses

This tool board panel can be used for:

Garage wall organization
Workshop tool storage
Testing industrial square-hole pegboard hooks
Designing custom 3D printed tool hooks
Pneumatic tool holder layouts
Small hand tool organization
Drill bit, socket or adapter holder projects
Modular maker-space storage
Testing fitment before printing a larger tool wall
Creating a small display board for accessories

Compatibility notes

The hole pattern is based on a 9 × 9 mm square-hole layout with 38 mm spacing. This is a common industrial-style tool board pattern, but hook compatibility can vary depending on the manufacturer, hook thickness and locking geometry.

Because this version has a 1.5 mm functional front plate, it is mainly intended for light-duty use, hook fitment testing and custom printed accessory development. For heavier tools, I recommend mounting it firmly to a rigid backing plate or using a reinforced version with rear ribs.

Important strength note

This is the thin 1.5 mm version, designed mainly for accurate hook compatibility and testing. A 3D printed plastic panel this thin will not behave like steel. For heavier use, mount the panel against a solid backing surface or use a reinforced version with rear support ribs.

Best use cases for this version:

Light tools
Test hooks
Display purposes
Small accessories
Design validation
Measuring and checking fitment

Not recommended for:

Heavy hanging loads
Long lever-arm tools
Impact loading
Hanging heavy pneumatic tools without extra backing support

Print settings / utskriftsinställningar

Recommended material: PETG, PETG-CF, ASA, PLA+ or Tough PLA Best all-round material: PETG Nozzle: 0.4 mm Layer height: 0.20 mm Walls/perimeters: 4 Top layers: 5–6 Bottom layers: 5–6 Infill: 80–100% Supports: No Brim: Recommended Brim width: 5–8 mm Print orientation: Flat on the build plate Cooling for PETG: 20–40% Cooling for PLA/PLA+: 80–100%

PETG settings:

Material: PETG

Layer height: 0.20 mm

Wall loops: 4

Top layers: 6

Bottom layers: 6

Infill: 100%

Supports: Off

Brim: On

Brim width: 6 mm

Nozzle temperature: 235–245°C

Bed temperature: 75–85°C

Fan: 20–40%

Outer wall speed: 30–40 mm/s

For best dimensional accuracy of the 9 × 9 mm square holes:

Elephant foot compensation: 0.15–0.25 mm

Hole horizontal expansion: +0.05 to +0.15 mm if your holes print too tight

Avoid crossing walls: On

Monotonic top surface: On

Readme / Instructions

Print the panel flat on the build plate.
Use brim if your printer has any tendency to lift corners.
After printing, check one square hole with calipers. It should be close to 9 × 9 mm.
Test your hook carefully before loading the panel.
Mount the panel using four M4 screws.
For stronger use, mount it directly against a rigid wall, plywood board or metal backing plate.
Do not overload the thin 1.5 mm version with heavy tools.

200x200 Square Hole Tool Board – 9x9 mm / 38 mm Pitch C/C

Generic PETG 0.2mm layer, 6 walls, 100% infill (Strong)