### Support Settings

* **Enable support:** True (Custom) | False (Default)

* **Support critical regions only:** True (Custom) | False (Default)

* **On build plate only:** True (Custom) | False (Default)

* **Remove small overhangs:** False (Custom) | True (Default)

* **Support Style:** Organic (Custom) | Default (Default)

* **Support Type:** Tree(auto) (Custom) | Normal(auto) (Default)

### Advanced Support Settings

* **Independent support layer height:** False (Custom) | True (Default)

* **First layer expansion:** 4 (Custom) | 2 (Default)

* **Base pattern (Normal):** Default (Custom) | Rectilinear (Default)

* **Interface pattern:** Rectilinear Interlaced (Custom) | Default (Default)

* **Interface spacing:** 0 (Custom) | 0.5 (Default)

* **Top interface layers:** 0 (Custom) | 2 (Default)

* **Top Z distance:** 0 (Custom) | 0.2 (Default)

### Tree Support Specifics

* **Support wall loops (Tree):** 2 (Custom) | 0 (Default)

### Strength Settings

* **Wall loops:** 4 (Custom) | 2 (Default)

---

### Important Note on Your "Clear" Profile

The most significant change here (aside from the switch to Organic Tree supports) is the **Top Z distance of 0** and **0 Interface Layers**. While this is sometimes done for clear filaments to ensure a solid, transparent bond between layers without air gaps causing "frosting," it will make the supports significantly harder to remove compared to the default 0.2mm gap.

If you want to read more about fine-tuning these specific parameters for the Creality Hi, the [Creality Wiki](https://wiki.creality.com/) is a great resource for nozzle-specific optimizations.

360 Degree Hot End Fan Duct/Shroud - For Sprite Extruder

0.16mm layer, 4 walls, 15% infill