This is a Rotating / Spinning Hardware Organizer Tray. It is customizable from 8 trays to as many trays as you want. All you need to do is add a new plate of trays and add an axle spacer to the central axle to accommodate an additional plate.

This is great for storing hardware fasteners such as bolts, nuts, washer, etc. It can also be used for storing and organizing electronic components such as resistors, capacitors, diodes, etc.

It is designed to be 100% Printable. No hardware required.

For one layer (8 trays) print:

Base.stl (x1)

Plate.stl (x1)

Tray.stl (x8)

Lid.stl (x1)

Axle.stl (x1)

For two layers (16 trays) print:

Base.stl (x1)

Plate.stl (x2)

Tray.stl (x16)

Lid.stl (x1)

Axle.stl (x1)

Axle Spacer.stl (x1)

For three layers (24 trays) print:

Base.stl (x1)

Plate.stl (x3)

Tray.stl (x24)

Lid.stl (x1)

Axle.stl (x1)

Axle Spacer.stl (x2)

For four layers (32 trays) print:

Base.stl (x1)

Plate.stl (x4)

Tray.stl (x32)

Lid.stl (x1)

Axle.stl (x1)

Axle Spacer.stl (x3)

Etc, etc.

---------------------------------------------------------

NOTE: Due to variances in printer calibrations, if you find the tolerances too tight to allow for proper rotation of the trays when you screw the Axle into the Base, I have included a couple spacers. There is a 0.20mm spacer and a 0.40mm spacer. The spacer will go over the threads of the Axle before screwing the Axle into the Base.

----------------------------------------------------------

Please Like, Favorite, Share and Upload photos of your Makes. :) It's helps keep me interested in making new designs for you. If you have ideas or requests, feel free to email me: diymakermindset@gmail.com

----------------------------------------------------------

Print with default settings. No print supports required.

The one displayed here was printed at 2 walls, 10% infill, 0.28 (draft) Layer Height, No support or brim. You can use default 0.20 Layer Height for better resolution.

-----------------------------------------------------------

You are authorized to:

Print — copy and distribute (give or sell) 3D PRINTS of this model in person or online.

What is not allowed:

No modification or adaptation (Remix) of this 3D model;

No distribution or resale of 3D digital files of the 3D model.

Rotating Hardware Organizer Tray, Nuts, Bolts, Washers &More