Design Concept

This 3D pendant is inspired by the iconic logo of the electronic music artist Aphex Twin. The model captures the recognizable abstract shape with smooth curves and rounded edges, giving it a clean and modern appearance. The design is optimized for 3D printing, balancing aesthetic accuracy with structural strength and durability. The integrated top loop allows easy attachment to a chain or keyring, making it suitable as a pendant or collectible accessory for fans.

Print Settings

Recommended material: PLA or resin.

Layer height: 0.12–0.20 mm (0.12 mm for higher detail and smoother finish).

Infill: 15–20% (grid or gyroid pattern recommended).

Print speed: 40–60 mm/s for optimal surface quality.

Supports: Not required if printed flat on its back surface.

Adhesion: Use a skirt or small brim for better bed adhesion if needed.

Nozzle: Standard 0.4 mm nozzle.

Assembly

No assembly required. After printing, carefully remove the model from the build plate and clean any minor imperfections. Insert a metal ring, chain, or cord through the top loop to use it as a pendant or keychain.

Aphex twin keychain

0.16mm layer, 3 walls, 12% infill