The duo of Triceratops and Styracosaurus are articulated with 13 joints. The body parts can move up, down, left, or right. See the below video for their range of movement.

The Stegosaurus and Ankylosaurus seen in the video are exclusives to my Patreon: https://www.patreon.com/thomastedwards/shop/flexi-stegosaurus-ankylosaurus-48733?source=storefront

You can print them smaller, but for best results print at the provided size. You can print them bigger for a greater range of movement, and at a higher quality to see all the details in the models better.

Do not print them with supports; they do not need them, and can damage the model when you try removing it from the supports! Brims should not be needed either.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.

If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

Articulated Ceratopsian Toys

0.16mm layer, 3 walls, 10 infill

0.2mm layer, 2 walls, 15% infill