As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury!

ℹ Tips for printing:

Filament: PLA

Supports: No!

Layer height: 0.16(0.15)mm or 0.2mm

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: -

Brim: No!

BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

Info‼: Do not scale the T-rex any smaller otherwise the connections will no longer work! You can Scale the T-rex taller.

Info‼: If you apply too much force to the connections they may break because the connections are small!

Info‼: Please be careful when removing the T-rex from the print bed!

Info‼: Print as oriented

!Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Credit to 3DPrintyi

https://www.**********.com/model/1607887-articulated-skeleton-trex

Articulated Skeleton Trex

0.16mm layer, 3 walls, 15% infill