The Artist’s Easter Bunny: Print, Paint, and Set Your Creativity Free

Description:

Bring a touch of Easter joy to your desk with this printable 3D model! This cute bunny is ready to celebrate with his basket full of colorful eggs.

This STL package is designed to offer maximum flexibility, whether you own a multi-color printer (like AMS or MMU) or a single-filament printer. The project file (or attached profiles) is organized into 3 distinct Print Plates:

Plate 1 (The Multicolored Bunny): Contains the bunny pre-set for multi-color printing (as shown in the photos). Grey for the body, white for the belly and snout, and a bright blue bowtie. Perfect for an immediate, effortless result.

Plate 2 (The Single Extruder / Paintable Bunny): Contains just the bunny without pre-defined colors. This is the ideal option if you have a single-extruder printer or if you prefer to print the bunny in a neutral color (e.g., white or grey) and then hand-paint it.

Plate 3 (The Basket and the 5 Eggs): Contains the red basket and the 5 Easter eggs. For this plate, I have set the print "by object" (print sequence: by object). This not only saves time and material (fewer movements and retractions), but it's also a safety measure: if a small egg comes loose, it won't compromise the entire print of the other objects. Important Note for the Eggs: If your printer doesn't handle 5 colors simultaneously well, or if you prefer, you can simply remove an egg from the plate or print a separate fourth plate with eggs of your preferred color (maybe all in a pastel color!).

Recommended Print Settings:

Layer Height: 0.2 mm for a good compromise between speed and quality. (For finer details and a "statue" effect, set to 0.16 mm or lower).

Perimeters: 2.

Infill: 15% (more than enough, the objects aren't load-bearing).

Adhesion: Brim is highly recommended, especially for the small Easter eggs, to prevent them from detaching from the build plate during printing.

Download the files and get ready for a fantastic Easter! If you print the model, I'd love to see your version! Upload a photo or tag me!

The Artist’s Easter Bunny: Print, Paint, and Set Your Creati

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill