Bring a sleek, anime-inspired look to your cosplay or display shelf with this stylized “Asuma Chakra” model. The design is a low-profile, ring-style blade silhouette composed of two mirrored bodies, giving it a crisp, layered look while keeping print time reasonable. At just 6 mm thick, it’s ideal for wall mounting, lightweight costuming, or as a paintable display piece.

Model details

Format: STL (manifold/watertight)
Parts: 2 discrete shells (included together in one file)
Triangle count: ~4,158 faces
Overall size (X × Y × Z): 251 × 145 × 6 mm
Volume (solid): ~81.7 cm³ (approx. 101 g in PLA @ 1.24 g/cm³)
Surface area: ~384.7 cm²
Center of mass: near geometric center for balanced handling

Printing recommendations

Orientation: Lay flat (faces parallel to the build plate) to maximize layer adhesion and keep both faces smooth.
Layer height: 0.16–0.28 mm (0.2 mm sweet spot)
Perimeters/walls: 3–4
Infill: 15–25% (grid/gyroid)
Top/bottom: 4–6 layers
Supports: Not required when printed flat
Adhesion: Skirt or light brim if your bed adhesion is marginal

Finishing tips

Quick wet-sand (220→400 grit) and filler-primer for a smooth, paint-ready surface.
Metallic spray or brushed metallic paints create a convincing “blade” effect; mask edges for contrasting highlights.

Notes

The STL contains two separate bodies in one file (as designed). Print as-is for the layered aesthetic, or split the shells in your slicer if you want to print/paint them in different colors and assemble afterward.
Dimensions are in millimeters.

Asuma Chakra — 3D Printable Prop