Design Concept

This miniature double bed with a mattress is designed for Barbie or dollhouses, featuring a stylish heart-shaped headboard for added elegance.

Use

Ideal for enhancing the interior of dolls' bedrooms in toy collections or as part of a model display.

Print Recommendations

No multicolour printer setup is required

No print supports required, except maybe a brim if you're experiencing adhesion issues

I've grouped parts within each file according to colour so they can be sliced and printed together on one build plate

Assembly Instructions

The bed frame, legs, head board and slates are all designed to snap-fit into place

Allow all parts to cool fully after printing before attempting to fit them together

I used a clearance of 0.2mm on all edges and found all parts snap firmly into position. Every printer tolerance differs slightly, so you may need to lightly file the tabs if the fit is too tight, or use a small amount of glue if they're too loose, but again - wait until everything is cool before doing so, as this allows the PLA to retract as it cools.

****

If you like this design, take a look at my profile for other dollhouse accessories. All my files are made free to download, but a boost would really be appreciated. It helps towards the cost of printing materials and encourages me to keep the free STL's coming - many thanks and happy printing!

Barbie / Dollhouse Double Bed + Mattress

0.2mm layer, 2 walls, 15% infill