Design

The pink and white parts can be printed together or separately, so no CFS required

Assembly

The shelves can either rest in position, or they can be glued if preferred

The wardrobe handles i've glued into place. There is a small concave divet in each draw to aid with alignment

Print Settings

Creality K1

0.4mm nozzle, 220 degrees

Bed temp 50 degrees

PLA / PLA+

Layer height 0.20mm

15% tri-hexagon infill

Print speed 200mm/s

Retraction 0.80mm

* Print Tip *

1. Print the two largest items upside down (feet facing upwards) to avoid the need for supports

2. The top layers of the two largest items require bridging after layer 296. My Creality K1 just about managed this with the above print settings, but with a tiny bit of sagging on layer 297. I would suggest pausing the print after layer 296, reduce the nozzle temperature slightly, max out the fan speed and then resume with a slower print speed. This should help the filament cool faster and reduce the chance of sagging on those last few top layers.

3. Print the wardrobe draws with the hollow opening facing upwards to avoid bridging on the final layers

Your Feedback

Check my profile for lots more FREE dolls house accessory print files. I don't charge for any of my STL files, but if you like my design and have a spare boost ticket to use up, your vote would be very much appreciated. Failing that, a thumbs up and a file download all helps towards my next free roll of PLA from Creality!

Many thanks!

Barbie / Dollhouse Furniture

0.2mm layer, 2 walls, 15% infill