Thanks to "TheSameNameTwice", i could sized the box parametrically in Fusion360 and then space was created for 50 coin holders.

The coins can be automatically aligned in the holders. This makes the box look good during a presentation.

The box can be provided with material tags. These can show the desired combination of filament coins. This makes it easy to assign the coins to the materials. The coins have 7 holes, which can be drilled through as desired after printing, as only the first layer is printed at the holes.

I have also uploaded a matching lid without material codes.

I printed the material tags in several colors. Of course you can also design your own tags.

If you are still missing something here, please write in the comments. I will be happy to create additional tags.

The Filament Swatch Coins can be found here:

https://www.crealitycloud.com/model-detail/67e5a5a964e6c7525b56aaa6?source=22

Print instructions

PLA is recommended. However, you can of course also use PETG or other materials. Print with 0.2 mm layer height. Without support structures.

But also take a look at the printing recommendation from the creator:

https://www.printables.com/de/model/540605-parametric-box-v2-single-clasp

Box for Filament Swatch Coins