06-12-2025 Update - hearing some feedback the star falls off easy I've added a little more material at the top of the tree where it meets the star. It's enough to get four walls if you want to increase the strength. I've added "_v2" files below. To save material but still get the benefit of 4 walls at the joint I've added a block modifier in the Print Settings file at the joint to increase walls to 4 only in that area. Thanks for the feedback to make this better!

----------------

Enjoy this fun twist on the passthrough fidget by celebrating the Christmas and holiday season with this Christmas Tree fidget!

The fidget has a star on top of the tree that requires supports to print the lower corners of the star. Downloading the 3MF file you'll have access to the print settings where I've painted the supports at these critical points. Pick your favorite filaments in one color or two and share this fun gift with a friend, family member, or make it for yourself.

Interested in other fidgets? Check my other models for personalized fidgets that are perfect for the holiday season.

Happy Holidays!

Christmas Tree Fidget

1 Plate, 4 Wall Modifier, 0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill