This is a full upgrade kit for the Creality Ender V3 KE

Included:

Upgraded Filament holder to reduce line jerking (3 walls, 20% infill)

Nebula Cam holder & included toolkit holder (4 walls, triangular 35% infill)

Waste tubs with a built-in retaining clip for the extruder cable (2 walls, 100% infill)

Filament guide for extruder (2 walls, 25% infill)

Gantry supports to reduce vibrations due to an unstable vertical frame (3 walls, triangular 35% infill)

Required:

M4x12 button head bolts and nuts for the gantry support

M4x16 Bolts (any kind) to replace the existing short bolts holding the interface.

M4x12 Nut and bolt (any kind) to clamp the spool holder

*(all nuts should have a 7mm distance from flat side to flat side)

*(Bolt heads should be 4.1mm in diameter or less)

*What I used (https://www.mightyape.co.nz/mn/buy/off-the-back-carbon-steel-socket-cap-bolt-nuts-500-pieces-7097355468859/)

Instructions:

ALL NUTS NEED TO BE PRESSED INTO PLACE

Spool Holder - Clamp around the existing holder using the nuts and bolts, attach the primary nut allowing a small gap (DO NOT clamp the filament roll), use the lock nut to keep the Contact nut in the desired position.

Cam/Tool Bracket - No assembly required, I recommend printing in the upright position using the default tree supports

Waste Tubs - Place the frame retaining clips in hot water before attaching to allow flex (Creality text is optional, and must be glued onto bins)

Filament Guide - Simply replace the existing extruder cable clamp (there is a correct orientation guide on the right)

Gantry Supports - x2 of both arms. Bolt all arms together, connecting the arms to their respective caps and attach to the printer, and attach the base to the printer. Once in place, choose the best bolt location and press the nut into the base connector (there are 3 possible placements to allow some adjustability between printers, as they aren't all the same). Feet to be printed in TPU; however, this is optional, and the frame will still be fully functional without them.

This is a collection of things I have made, things others have made, and remixes of others' work.

I have attached the creators of the tool holder and the waste tubs; however, I have not been able to find the creators I originally got the camera holder and gantry supports from (although very different from the originals). Please comment if you know, and I will update the page.

Creality Ender V3 KE Full Upgrade Kit

Original