https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila

https://pt.aliexpress.com/item/1005005961786030.html

If you have a lid riser and want to improve the ilumination of your k1, the easiest way is just stick the ledstrip on the wall of the lid riser, but this bring a problem! If you need to do a maintenance isnt possible to remove as everithing is attached to the led strip power cable.

My solution is a support that fixes the LED strip independent of the lid riser.

Now, I can do the maintenance withou worry.

Print this model 4 times each.

Attach this model under de frame using the original screw

Zip tie each corner to prevent the chain link from disengaging the bridge

Recommended to buy:

1xJST 1.25mm male connector (2 pins)
1xJST 1.25mm female connector (2 pins)

https://pt.aliexpress.com/item/1005005961786030.html

With this connectors you can attach the LED strip while preserving its originality, without having to cut wires

Lid riser that fit in this model: https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila

Creality K1 Independent Ledstrip Support

0.2mm layer, 2 walls, 15% infill