*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.

https://linktr.ee/leoteapproach

/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate links

INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw

HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/4imGAQW

HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4

FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://amzn.to/3G3Z1wr

FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/43JeThP

/////LOGO AND LETTERING LINK

https://www.crealitycloud.com/model-detail/67bd719fd82185dbbb5061b3?source=22

/////ACCESSORIES FOR THESE PANELS by @stoffies00711

If you’re printing this project, you might want to take a look at some accessories made by @stoffies00711 that work with these panels.

I’m leaving the link here in case you want to check them out.

https://www.crealitycloud.com/model-detail/pfte-tube-clips-leote-approach-k1-side-panels?source=61

https://www.crealitycloud.com/model-detail/gluestick-cutter-holder-for-leote-panels?source=61

https://www.crealitycloud.com/model-detail/k1-k1c-tool-holder-leote-approach-side-panel?source=61

/////ATTENTION - PDF GUIDE AVAILABLE

- If you use the version with the sensor repositioning, you need to INSTALL [4x] M3 D5 L5mm INSERTS ON WALL 2 on the RIGHT side.

- Make sure the bolts aren't too long. They shouldn't go past the frame's thickness to avoid damaging any internal components.

- The project parts should be PRINTED in ABS or similar materials due to their resistance to high temperatures, ensuring durability and reliability.

- THIS PROJECT IS DESIGNED TO REPLACE THE PRINTER'S SIDE PANELS.

CREALITY K1max SIDE PANELS [CLOSED + SPOOL HOLDER]

0.2mm layer, 3 walls, 15% infill

0.24mm layer, 2 walls, 15% infill