Creality Vacuum Pump Multibin Top

Improved-fit vacuum pump insert designed for the Multibin system.

This version rebuilds the original insert geometry with adjusted tolerances and proper support for mechanical retention using the Multiboard Top Click Rim. The insert drops into a standard 2×2×1 Multibin shell and does not require glue or magnets.

Features

Improved tolerances for easier fit

Designed for use with the Top Click Rim

Revised pocket geometry based on real-world use

Compatible with standard Multibin shells

Uses less filament than a full-height bin insert

Printing Instructions

Orientation: Print upside down

Supports: Required (tree supports recommended)

Material: PLA tested; PETG also suitable

Walls: 3

Layer Height: 0.20 mm

Printing upside down significantly reduces material usage. Some horizontal pocket surfaces may show minor support artifacts, which does not affect functionality.

Assembly

Insert the part into the Multibin shell

Install the Top Click Rim

The rim mechanically retains the insert

Compatibility

2×2×1 Multibin Shell (LU – Topped Rail)

2×2 Top Click Rim

Creality vacuum pump and accessories

Credits

This model is a remix of:

Creality Vacuum Pump Insert for Multibin by Jay Shelton

2×2 Multibin Top – STEP Remixing File by Multiboard

Creality Vacuum Pump Multibin Top

0.2mm layer, 3 walls, 10% infill

0.2mm layer, 2 walls, 15% infill