刀鞘是自由创作的，适配我的另一个模型赛博朋克武士刀！我个人用的金属刀条，刀条的数字模型也会上传，但需要自己分件~如有其他需要，可以联系我

The scabbard is a free creation, designed to fit my other model - the Cyberpunk Samurai Sword

I personally use a metal blade. The digital model of the blade will also be uploaded, but you need to split the parts yourself. If you have any other needs, feel free to contact me.

如图所示，刀鞘与刀柄上有8个圆形凹槽，我准备是镶嵌入5*1mm厚的圆形磁铁。防止多次使用后松脱

刀柄根部使用的是M4*12的对锁螺母

装饰板使用M3*10的圆头螺丝固定

固定金属刀条还使用了AB透明树脂胶水，把金属刀条柄部加热敲入刀柄，定型后拔出再涂胶，插入，然后再灌胶

As shown in the figure, there are 8 circular grooves on the scabbard and the handle. I plan to inlay 5*1mm thick circular magnets in them to prevent loosening after multiple uses.

The root of the handle uses an M4*12 locknut.

The decorative plate is fixed with M3*10 round-head screws.

AB transparent resin glue is also used to fix the metal blade. The handle part of the metal blade is heated and knocked into the handle. After shaping, it is pulled out, then glued and inserted, and finally filled with glue.

刀鞘~赛博朋克2077武士刀配鞘 Scabbard ~ Cyberpunk 2077 Samurai Sword Mat

0.2mm layer, 2 walls, 15% infill