Add some much needed shade to your desert terrain using this (supportless) palm tree sand tile.

Print 2 leaves and glue or just put them together.

Print on 0.12 quality, otherwise the finish on top isn't as nice as it can be.

Assembly of the tree:

Put the two leaf pices together with the flat sides facing eachother.

Insert in the tree base.

Done!

I put the tiles on the Openlock system, making it possible to click the parts together and don't be afraid your players push your scene away.

I also added aditional beams, because I found that printing the big ones without them gives a very bad texture at the bottom. And if I put the time and money in tiles, I want them to be pretty and sturdy.

For the tree I removed the base and fixed a printin problem on the leaf-connector part.

Instructions:

Print the tiles of your choice.

Remove the small supporting pins on the sides.

Print Openlock clips to connect the tiles.

Push one or more Openlock clips into the tiles (depending on the size of the tile 1 can be enough, 2 works best with big tiles).

Connect the tiles together.

Desert tiles - sand tile with palm tree

Sand tile with palm tree

0.2mm layer, 2 walls, 15% infill

Original