It helps categorise, manage, and present content effectively, commonly found in applications.

About 130mm in width x 30mm in height.

I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here: https://makerworld.com/en/models/59055#profileId-64529.

Additionally, take a look at my latest model: https://makerworld.com/en/models/74403

Suggested print settings:

No supports are needed but follow the suggested print orientation for ideal results.

Change Log:

7 November 2023: Created a connector component ("Divider Board Connector-ChrisTech.stl") for linking or extending multiple divider boards ("Divider Board-ChrisTech.stl").

15 November 2023: Fine-tuned the tolerance in the design for the divider board("Divider Board-ChrisTech.stl").

21 November 2023: Upload an editable file for the divider board("Divider Board-ChrisTech.f3d"). Should the current length of the divider board be insufficient, you have the option to utilise the pattern feature for extending its length and revised Connector - Version 2 ("Divider Board Connector Version 2-ChrisTech.stl").

Buy me a coffee?

If you like my work, show me a little support by buy me a coffee (https://buymeacoffee.com/chrisong). Appreciated!

Divider DIY Storage

0.2mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Remix Models