Best material:

Transparent PETG highly recommended for a glass-like appearance and durability.

Clear PLA+ works well for sharper details but with slightly less transparency.

Resin (clear) ideal for premium jewelry-grade finish with maximum clarity.

Layer height:

FDM (Creality K1C): 0.12 mm for clean geometry

0.08 mm for smoother optical finish

Resin: 0.03–0.05 mm for ultra-clear surface quality

Supports:

Yes, required.

The overlapping ring structure creates overhangs beyond 45°.

Use tree supports (8–10% density), touching build plate only.

Place carefully to avoid marks on the most visible outer arcs.

Infill:

100% for wearable strength

25–30% gyroid for larger decorative prints

Walls:

4–5 perimeters for improved strength and better light diffusion in transparent materials.

Orientation:

Tilt 25–35° to minimize support contact on visible surfaces and reduce layer line artifacts.

Avoid printing flat to preserve optical consistency.

Scale Suggestions:

18–22 mm inner diameter → wearable ring

60–80 mm → decorative modern sculpture

120 mm → display centerpiece

Dual Orbit Fusion Band – Noah0x03