Printing in just half an hour, this fun fidget toy will provide hours of fun. You can turn the gears endlessly. You can spin it around and around.

Easy to put together

NO glue required (However recommended)

Endless fun

Durable design

Background:

I was playing around with some gears one day and thought, "this would make a great fidget toy." But, it needed something more. And that is when I thought of a fidget spinner. Two of the most satisfying things put together would make a great combo! Then, about an hour of tinkering later, this wonderful design was made.

Print Settings:

I recommend NO supports. The g-code provided is a little old.

2mm layer height should be perfect, and keeps the print time low. Of course, depending on your printer print times can vary. Whether it is the calibration on the printer, the print speed, and a million other factors.

15% infill should be perfect. You can go lower or higher if desired.

Finally, Do not put a brim. As mentioned earlier the g-code is a little old, so there is a brim on one piece. However, Using brim on anything, especially the gears, could cause problems in the moving parts.

Finally:

Have some fun! Don't wait, print yours now!

(This model may become a paid model in the future, so download while you can!)

DuoTwirl Gears - Fidget Toy

0.2mm layer, 2 walls, 15% infill