Design Concept

This design is inspired by the charming and plump aesthetic of squishmallows, aiming to incorporate the festive elements of Easter with a playful twist. The Easter bunny and chick is crafted with a rounded body and soft features, appealing to both children and collectors.

Use

This model serves as a delightful decoration for Easter holidays or anytime during spring, adding a touch of whimsy to your decor. It can also be used as a unique gift idea for Easter celebrations. When printed with translucent filament can be used with tealight led, standard ones will fit in the bottom hollowing.

Print Recommendations

Models are designed to use as low material as possible. Chick and bunny are fine to print 0.2 mm layer height. For bellies I recommend 0.08 layer height. No special filament recommendations, however use of translucent filaments will enable use of the models with tealight LED. Support is needed for chick and bunny top edge of belly slot (depends on filament and printing speed you may do without support) and of course bunny tail. Ears, nose and other elements does not require supports. To ensure good adhesion with higher speeds and bed-slingers brim is recommended (models are relatively tall and lightweight). Belly does not need supports nor brims.

Of course you have to print one belly for each chosen figure (chick or bunny). Bellies and slots are the same for both models. Bellies provided in three versions - blank, "Happy Easter" and polish "Wesołych Świąt". Feel free to add your own wishes on blank belly.

Opt for colors that emphasize the festivity of Easter.

Assembly Instructions

This model is designed to use two colors and to be printed with single colour printer so it need to be printed in two parts which needs to be glued after printing.

Easter bunny and chick -"squishmallows" style

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill