An Elegant sliding-cover Wallet, which presents up to 4 cards when opened, plus space for 3 further cards, a locator tag, or cash.

By default the Front Cover bottom surface is set to Octagon Spiral, but feel free to print this with a different surface or in a different colour/material on a separate plate.

Use the Slicer's Add tool to add text or imagery if you wish - I'd recommend a 0.5mm cut. A full tutorial on how to use this is outside the scope of this description, but there are plenty of tutorials out there on how to play with this feature.

The Wood Grain texture is also outside the scope, but I created it by experimenting with what's in this model: https://**********.com/en/models/868884-add-wood-grain-effects-to-your-models-using-a-smal

Additional Parts and Assembly

To assemble you'll need 4 M3 x 8 countersunk bolts plus 1 M3 x 10 countersunk bolt.

First slide the Clip into the base of the Inner Case. The easiest way to clip it in fully is to hold them vertical on a flat surface and push down until the Clip 'Clips' into place.

Then pop one of the M3x8 bolts into the lower left hole, and place the Cover on top. Carefully flip these over, and align the Lever over the protruding column from the Cover, such that it points to the right. Use the M3x10 bolt to attach it firmly.

Then flip it back over, and rotate the Cover to the side so that you can see the bolt you inserted earlier plus the other three bolt holes. Place this all on top of the Case Back, and screw the bolts into place, and we're done!

Elegant Wallet

0.16mm layer, 3 walls, 15% infill

0.2mm layer, 3 walls, 15% infill