Step into the realm of Dark Fantasy Egyptian Mythology with this epic Mummy Pharaoh Warrior vs. Sobek Crocodile Monster 3D printable diorama. This statue is designed with dynamic action and extreme detail to serve as a formidable collector's piece.

Print-Optimized STL Versions Included
To ensure successful printing across different machine sizes:
Full Statue (Single Piece): Complete model in one STL file, ideal for large build volumes (Resin or FDM).
Split/Keyed Parts (Recommended): Model divided into interlocking components for better detail, easier support removal, and smooth post-print assembly.

Size and Scaling
Native Height: Approximately 175–180 mm (around 7 inches, including the base).
Scalability: Files are designed for easy resizing, allowing adjustment for smaller gaming scales or larger display pieces.

Technical Quality Guarantee
Fully optimized, error-free mesh with no holes, non-manifold edges, or intersecting geometry.
Watertight STL, verified and ready for printing.
Compatible with all major slicing software, including Chitubox, Lychee, ****, and PrusaSlicer.

For Resin Printers (Recommended for Best Detail)
Layer Height: 0.03 – 0.05 mm (finer layers produce superior detail).
Exposure Time: 2–3 seconds per layer (depending on resin type).
Bottom Exposure: 25–30 seconds for strong plate adhesion.
Supports:
Use medium-density supports.
Tilt the model at a 30–45 angle to minimize layer lines.
Ensure support points under overhangs, claws, teeth, and cloth edges.
Orientation: Position the model so that the most detailed surfaces (faces, scales) face upward.
Post-Processing:
Wash with isopropyl alcohol for 5–7 minutes.
Allow to dry completely before UV curing (5–10 minutes).

For FDM Printers (Ender, Prusa, etc.)
Layer Height: 0.08 – 0.12 mm for fine surface quality.
Nozzle Size: 0.4 mm (or 0.25 mm for ultra-fine detail).
Infill: 10–15% is sufficient for display purposes.
Supports:
Required for claws, tail, and upper body sections.
Use Tree Supports for easier removal (available in **** or Bambu Studio).
Walls/Shells: Minimum of 3 perimeters for strength.
Bed Temperature: 60C.
Nozzle Temperature: 200–210 C for PLA (adjust based on filament).
Adhesion Type: Use a Brim or Raft to ensure bed adhesion.

Epic Egyptian Mummy Warrior & Sobek Monster