This cute flexy character is an easy print-in-place designed artwork without support.

Prints considerations:

There are some rulles you must consider while printing little articulated designs with silky pla, especially when it has lots of little joints like this one. if you are new, it is better to print with normal pla in low layer height and lower speeds. while going with silky pla, especially in this model that is perfectly articulated and tested by several other makers, reduce the speed of cooling fan to 50%, lower the print speed at least by 70% in your slicer, put the retraction distance to 4.0 mm or a little higher, and for much better results, rescale the model to larger sizes. I also recommend activating the option "Avoid crossing outline for travel movements."

PRINTING SETTINGS:

-Print in place

-no support

-3 outline shells is reccomended

-20% infill to be safe

A complete version is exclusively free to my Patreon subscribers, including mountable hats, boots, ... !

If you are a seller of 3D printed objects and are looking for authorized permission to sell your awesome makes, click on the link below:

patreon.com/FancyGlobe

⚠⚠⚠⚠ All designs of "FancyGlobe" are under copyright protection. You are not allowed to copy or redistribute files in any condition or sell your 3D makes of our design without authorized permission.

FLEXY SHERIFF CHAMELEON/LIZARD

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill