Design Concept
Inspired by the aggressive front fascia of the Ford Focus RS MK3, this wall-mounted key holder brings a touch of high-performance automotive styling to your home or garage. Every detail, including the signature wide grille and aerodynamic hood lines, has been meticulously engineered in Fusion 360 to ensure a high-fidelity look that remains easy to 3D print.

Key Features
Precision Engineering: Modeled in Fusion 360 with specific tolerances to ensure a professional, flush finish against the wall.
Integrated Keyslot Mount: The rear of the model features a built-in keyhole slot. This mechanical mounting system allows the holder to slide securely over a standard wall screw, providing a clean, invisible, and much stronger installation than traditional adhesives.
Functional Durability: The hooks are integrated directly into the front splitter design, reinforced to handle heavy daily-carry keychains without deforming.
Printing & Material Advice
Recommended Material: PETG. To ensure the structural integrity of the integrated hooks and the mounting slot, PETG is highly recommended. Its superior impact resistance and durability make it the ideal choice for functional household items compared to standard PLA.
Layer Height: 0.16mm - 0.2mm. This range captures the sharp details of the Focus RS grille while maintaining strong layer adhesion.
Infill: 20% (Gyroid or Grid) is recommended to provide internal strength around the keyslot area.
Supports: Minimal supports are needed for the front grille overhangs and the internal cavity of the mounting slot.
Assembly Instructions
Print: Use PETG for maximum mechanical strength and longevity.
Wall Prep: Install a standard screw into your wall with a proper anchor, leaving the screw head protruding approximately 3-5mm.
Mount: Align the integrated keyslot on the back of the Ford Focus with the screw head and slide it downward to lock it firmly into place.
No extra hardware, glue, or brackets are required for the model itself.

Ford Focus RS Key Holder - Functional Car Wall Art

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill