Ford Mustang Hoonicorn V2 Functional Key Holder - Gymkhana Tribute
Design Concept
Inspired by the world-famous Ford Mustang Hoonicorn RTR V2, this wall-mounted key holder is a tribute to the ultimate drift machine. Meticulously modeled in Fusion 360, this piece captures the aggressive wide-body kit, the iconic 1965 Mustang silhouette, and the legendary twin-turbochargers piercing through the hood. It’s engineered to balance high-fidelity automotive art with practical 3D printing functionality.

Key Features
Precision Fusion 360 Engineering: Every component, including the intricate turbo details and front grille, has been refined for clean printing geometry and a professional finish.
Integrated Keyslot Mount: The rear of the model features a built-in keyslot (keyhole) mechanical mount. This allow the holder to slide securely over a wall-mounted screw for a flush, invisible, and heavy-duty installation—no adhesives required.
Reinforced Dual Hooks: The hooks are integrated into the front aero-splitter, designed and tested to hold multiple sets of heavy keys without bending or breaking.
Printing & Material Advice
Recommended Material: PETG. To ensure the structural integrity of the integrated hooks and the mechanical mounting slot, PETG is highly recommended. It provides the impact resistance and durability needed for a functional item that will be used daily.
Layer Height: 0.16mm - 0.2mm for an optimal balance between surface detail and structural bond strength.
Infill: 20% (Gyroid or Grid) to provide solid support for the mounting area and the protruding turbos.
Supports: Minimal supports are recommended for the front splitter and the internal cavity of the keyslot.
Assembly Instructions
Print: Use PETG for maximum mechanical longevity.
Wall Prep: Install a standard screw into your wall with a proper anchor, leaving the screw head protruding approximately 3-5mm.
Mount: Align the integrated keyslot on the back of the Hoonicorn with the screw head and slide it downward until it locks firmly into place.

Ford Mustang Hoonicorn Key Holder - Ken Block Tribute

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill