A simple little gift I’m going to be giving to my wife soon. She never checks my Thingiverse, so I figure I can release it early, lol.

The image is a fox and a wolf with hearts of the same color in the other. I used "Wolf Silhouette" by Laulyh (https://www.thingiverse.com/thing:4428362) and "Food Webs" by mfritz (https://www.thingiverse.com/thing:1789130) for the fox and wolf designs, with slight modifications on both. I’d tag them with the "remix" feature but Thingiverse’s remix search thing isn’t working, so I’ll have to just list it here instead.

I printed these in two different filaments - Metallic Copper by Stronghero3D and Marble by CC3D. (I bought these filaments before the lockdown, and they were good quality then, but post-lockdown, who knows. Even some of the good Hatchbox filament spools were terrible earlier in the year.)

No supports are needed, and you can probably get away without rafts, but I used a raft because the hearts are small. Total print time on an Ender 3 at low quality was about 8 hours.

Fit is pretty tight on these guys with normal settings. I literally had to use a hammer to fit the pieces together, but it makes them solid and snug. If you hammer, use something thick and soft between the PLA and the hammer and between the PLA and the surface you’re hammering on to avoid damage / staining, etc.

OG creator https://www.thingiverse.com/Ellie_Valkyrie

https://www.thingiverse.com/thing:4657141

Fox + Wolf Love gift

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill