Design Concept

I’ve been printing a few hueforge Prints recently and I wanted to create a freestanding frame to display them, so I put together this simple design.

This frame is designed specifically for prints that are 150mm x 150mm. Its sleek design allows the artworks to stand out while being securely held. It is designed to be able to swap displayed prints with ease without needing to disassemble the frame and made so 100% of the hueforge is displayed without the edges being hidden.

Use

Ideal for artists and hobbyists looking to display their hueforge prints in a stylish and protective manner. It provides sturdy support and a professional look.

Printing Recommendations

Use PLA or PETG for durability. Ensure good bed adhesion to prevent warping, I use an adhesive spray on my build plate (not glue stick)

Print at a 0.20mm layer height

2 or 3 walls

15% infill

Supports enabled (for mounting notch in frame)

This model prints in 2 parts and will fit on a single 220mm x 220mm build plate.

Assembly Instructions

The stand has a tab at the bottom which slots into the bottom of the frame, I recommend gluing the stand to the frame with ca glue to ensure stability.

Your hueforge should fit snug inside the frame and shouldn’t fall out however if you don’t plan on changing your prints you could fix them in with some double-sided tape.

The mando hueforge pictured in my photos belong to Litolunar you can find it here.

Creality Cloud -Hueforge Mandaloriano From Litolunar https://www.crealitycloud.com/model-detail/68bae4997e9d94b35e1e4ab7

Hueforge free standing frame for 150mm x 150mm Hueforge

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill