Design Concept

The Haunted House Mobile Decoration features a spooky, mysterious mansion silhouette imbued with whimsy, as ghosts flutter and circulate hauntingly in the windows. This playful design captures the spirit of Halloween, making it perfect for seasonal decoration. Check out my video https://youtube.com/shorts/9y1G0JIcHeY?si=qPXOnuyXvSs1_koG.

Purpose

This model is perfect for adding a touch of Halloween to any room, enhancing the atmosphere with its unique and captivating design. It’s great for hanging on walls placing in windows and is free standing on shelves as a charming, eerie decorative piece with atmospheric lighting.

Printing Suggestions

For optimal results, use a layer height of 0.2mm, with 15% infill to balance weight and stability. Opt for a dark filament to give the mansion a spooky nighttime effect but other colors will produce interesting results. Supports are only required when printing the large rotor all other parts do not need supports.

Assembly Instructions

The mobile makes use of a battery quartz clock mechanism to power two rotating arms of ghosts. The large outer rotor attaches directly to the mechanism in place of the minutes hand and the small inner rotor to the seconds hand, the hours hand is not used. To ensure good grip the inner rotor is a tight fit and may need some heat to easily push the seconds hand in place alternatively it can be glued to the seconds hand.

Internal decorative lighting is provided by stringing led string lights either battery or usb powered to the pegs on the inside of the front plate.

The model includes an additional "small ghost flat" stl which can be scaled and glued to the house to add additional decoration.

The parts I used are listed here but many similar options are available on Amazon:-

clock mechanism

https://www.amazon.com/dp/B0DFPVRX28?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2led lights either

https://www.amazon.com/dp/B0DK51K54P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

https://www.amazon.com/dp/B0DGPGV4Q3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 with these 33ft lights I found it a lot brighter and wrapped around the pegs two or three times and then use the attic space at the top of the model for the remainder.

Haunted House Mobile Decoration

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill