

Design concept

Heart-shaped moulds to create cement planters that connect together to form a heart <3

Made from cement, these pots can hold soil without leaking water. Join two planters (one right and one left) to create a heart and celebrate the love of Mother's Day. The perfect gift accompanied by a beautiful plant for your mom.

You can also form other shapes, even a big flower if you put 4 hearts together, so let your imagination run wild.

How it works

Watch this video for a precise explanation of how the planters are made: https://youtu.be/SMyUqQ71aRQ

You must print one piece of each (6 pieces in total), each piece corresponds to one file. (I recommend printing the base and the walls together).

To make the right half of the planter you will have to build the mould with the base, the walls and the inner mould (right). Rotate the walls so that they fit into the base and the inner mould can be anchored. For the left part, you only have to change the right mould for the left one and turn the rest of the pieces to fit it.

If you have any questions or want more information check my instagram and contact me: https://www.instagram.com/creaserra

Printing settings

For the printing of the parts, it is only necessary to use supports for the holes in the wall1 and wall2 parts.

The inner moulds (right and left) are printed upside down, so that the protrusions are touching the print bed, as they are designed not to need supports.

As they are moulds you can use a higher layer height and (>0,2mm) and use the filament that you are most excited about.

Heart-pots

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill