Creality CFS + Creality Universe

16-Color Print Instructions for “The Maw of Erebus” STL

This workflow assumes:

You have a 16-color capable Creality CFS setup
You are slicing in Creality Print / Creality Universe
The model is already converted into an STL or multibody STL
You want a dark cinematic horror finish similar to the image

1. Prepare the STL

Before importing:

Recommended Model Specs

Scale: 180–260 mm tall
Layer Height: 0.12 mm for detail
Wall Count: 3–4
Infill: 12–18% Gyroid
Supports: Tree Supports
Support Density: 12%
Enable:

“Detect Thin Walls”
“Sharp Detail Preservation”
“Ironing Top Surfaces” (optional)

Because this creature has:

thin tendrils
teeth
organic folds
deep cavities

…you’ll get better detail at slower speeds.

2. Recommended 16-Color Palette

This creature works best with mostly desaturated nightmare tones.

Slot Layout for CFS

Slot	Color	Usage
1	Matte Black	Shadows / deep void
2	Charcoal Gray	Body texture
3	Ash Gray	Bone ridges
4	Pale Ivory	Teeth
5	Bone White	Skull plating
6	Flesh Pink	Organic tissue
7	Dark Crimson	Blood zones
8	Deep Red	Mouth interior
9	Burgundy	Veins
10	Gloss Black	Wet surfaces
11	Metallic Silver	Ships / armor
12	Gunmetal	Mechanical debris
13	Midnight Blue	Space reflections
14	Purple Black	Alien shadows
15	Transparent Red	Slime effects
16	UV Reactive White	Eyes / glowing areas

3. Import Into Creality Universe

In Creality Print:

Open the STL
Right click model
Choose:

“Convert to Multi-Color”

Open:

Color Painting Tool

Use:

Smart Fill
Height Range
Triangle Selection

for cleaner painting.

4. Color Mapping Guide

Main Body

Use:

Charcoal Gray
Ash Gray
Purple Black

Blend gradually.

Technique

Dry organic transitions
Randomized texture painting
Avoid solid flat color regions

Teeth + Mouth

Teeth

Pale Ivory
Bone White
Slight crimson staining near roots

Mouth Interior

Deep Red
Burgundy
Transparent Red highlights

Eyes

Use:

UV Reactive White
Tiny touch of Midnight Blue

Enable gloss if available.

Tentacles

Gradient:

Black base
Flesh Pink midtone
Bone White tips

This gives an unsettling biomechanical look.

5. Best Print Orientation

Recommended Angle

Tilt:

35° backward
15° sideways

This:

preserves mouth detail
reduces support scars
improves tentacle strength

6. Support Settings

Tree Supports

Recommended:

Organic Tree
Branch Angle: 42°
Branch Diameter: 2.5 mm
Contact Distance: 0.18 mm

Critical support zones:

underside tentacles
inner jaw
hanging tendrils

Avoid supports inside tiny tooth gaps if possible.

7. Print Speed

Slow = Better Horror Detail

Setting	Speed
Outer Wall	35 mm/s
Inner Wall	60 mm/s
Infill	90 mm/s
Travel	180 mm/s

Turn OFF:

aggressive acceleration
vibration compensation at high values

This model benefits from cleaner organic surfaces.

8. CFS Color Change Optimization

16 colors can create:

massive purge waste
long print times

Reduce Waste

Enable:

Flush Into Infill
Flush Into Supports
Smart Color Ordering

Set:

Minimum Purge Volume = Medium

Avoid frequent tiny color swaps in the same layer.

9. Recommended Filament Types

Area	Material
Main Body	Matte PLA
Teeth	PLA+
Wet Flesh	Silk PLA
Eyes	UV / Glow PLA
Metallic Debris	Metallic PLA

Avoid PETG mixing unless fully calibrated.

10. Final Horror Finish

After printing:

Optional Effects

Satin clear coat
Gloss varnish inside mouth
Black oil wash in crevices
UV flashlight on eyes

This dramatically increases the “alive” appearance.

11. Estimated Print Stats

Size	Time
180 mm	18â€“28 hrs
250 mm	35â€“55 hrs

Material:

700g–1.8kg depending on scale and purge.

12. Suggested File Name

Maw_of_Erebus_CFS16.3mf

Saving as .3mf preserves:

color painting
filament assignments
support structures
purge settings

That way you don’t lose the 16-color mapping later.

The hollow God hughforge