This is a Hollow Knight Hunter character inspired hood ornament addon for the 'Quake Champions inspired hood ornament magnetic' hood mount. Use the 'Hood Mount Base.stl' from the 'Quake Champions inspired hood ornament magnetic' model project to mount the hood ornament.

The Hunter head was used from the 'Hornet joystick stand' model by Robert Bossard.

Please see the 'Quake Champions inspired hood ornament magnetic' project page and the details there where you will need to print the 'Hood Mount Base.stl' and info on obtaining 1/2 x 1/4 x 1/8 inch magnets to finish the print to put on a car. The mount part is under a more restrictive license so can't be included in this project.

https://www.crealitycloud.com/model-detail/quake-champions-inspired-hood-ornament-magnetic

I included a project file(Print Profile) for the Hi 3d printer that includes coloring for multi color printing if using a CFS. It also includes a modifier object to print more walls for the lower part going into the main part of the object a little.

I also included an X1C project for Bambu printers (HollowKnightHornetInspiredHoodOrnament_X1C_project.3mf) that also includes the multi-color support and modifier for extra strength.

I personally just use black acrylic paint for the eyes to not waste filament even though I have a multi-color printer.

Printing Notes:

0.2 mm layer height

3 walls

Supports set to auto tree
See the printing orientation in the pictures. I put it at an angle so that supports are more on the bottom than the side or top.

Hollow Knight Hunter inspired hood ornament (addon)

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill

Original