Hot Wheels Exposing Ramp — 1:64, Small

🧩 Description / Design Concept

Compact display and play ramp for 1:64 scale cars such as Hot Wheels, Matchbox and similar brands. It provides a gentle incline for showcasing individual cars or running them down a smooth slope during play. Small footprint makes it easy to drop into shelves, dioramas or desk setups as a simple highlight stand.

🖨️ Printing orientation & tips

Print vertically as shown in the photos (ramp standing on its base).

Use Concentric pattern for the bottom surface to get a clean contact area.

Optional: enable Fuzzy Skin on the outside to create a matte, grippy effect.

No supports required in the intended orientation.

Adhesion: PEI smooth or textured sheet with glue stick or another adhesion aid recommended.

🛠️ Recommended settings

Layer height: 0.20 mm

Walls / perimeters: 2 (increase to 3–4 for very rough handling)

Infill: low infill (≈10–15%) — grid/gyroid both work well

Top/Bottom layers: 3–4

Material: PLA is perfectly fine for display/use; PETG/ASA if you want extra toughness

Supports: Not required when printed vertically on the base

📝 Notes

Ideal as a small exposing stand on shelves or in display cases.

For a uniform look across a collection, print multiple ramps from the same filament/color.

If your printer has adhesion issues when printing tall vertical pieces, add a brim for extra stability.

🔧 Assembly

No assembly — this ramp is a single solid print, ready to use straight off the bed once cooled.

☕ Support & Follow

If you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.

You can buy me a coffee simply by printing and boosting my files — nothing more 😉

Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.

If you’re interested in commercial use of this model, please contact me by leaving a comment.

Hot Wheels exposing ramp, 1:64 cars, small

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill