Overview

This is a custom-designed storage solution for the Kisrel UV Resin kit, specifically tailored for integration with the Honeycomb Storage Wall (HSW) system. It provides a secure, space-saving mount for two 100g resin bottles and the oval UV light included in the kit, keeping your post-processing tools organized and easily accessible.

Design & Remix Details

This model is a remix based on the HSW Connect Anything system by kyz.

To ensure maximum stability and weight distribution for the resin bottles, the mount utilizes a reinforced base with four integrated HSW connectors.

Modifications: I utilized the "single 1 high" HSW connector as a base. I added a 52.48mm bar to achieve a 40.88mm distance to center. Accounting for the 11.6mm housing of the connector, I expanded the structure to four connectors across for a rock-solid fit on the HSW grid.

Recommended Print Settings

This model was tested and printed on a Creality K2 Pro with the following settings to ensure durability and a perfect fit:

Filament: PETG (Highly recommended for chemical resistance and durability)

Nozzle Size: 0.4mm

Layer Height: 0.2mm

Wall Line Count: 4 (Crucial for the strength of the HSW connectors)

Infill: 15-20% (Gyroid recommended)

Supports: None required

Brim: None required

Installation Instructions

Print: Print the STL in the provided orientation (lying flat on the bed).

Mount: Align the four connectors on the back of the mount with your Honeycomb Storage Wall grid and press firmly until they snap into place.

Organize: Slide your two 100g Kisrel bottles into the circular slots and place the oval UV light into the center housing.

Licensing

This work is licensed under Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA 4.0). You are free to share and remix, provided you give attribution, do not use it for commercial purposes, and distribute your contributions under the same license.

HSW Mount for Kisrel UV Resin Kit (Dual 100g Bottles & Oval

0.2mm layer, 4 walls, 15% infill

Original