Hey guys, as its easter i decided to design something traditional and it came out like this, very happy with the results

It is an easy print, supports is optional ive successfully printed without on the k1 max but i would recommend them for maximum detail

Optional - Furry Walls - Please check the Print settings below

Print Settings
Infil - 15%
Seam Position - Random
Supports - Under Chin - Recommend light tree / No Roof / No Brim
Ironing - Recommended Not needed
Layer - 0.16 (Can go lower but not needed)
Print Flat

Same Settings as Above
Fuzzy Skin Settings (Optional)
infil - 20%
Fuzzy Skin - Contour
Distance - 0.8
Thickness - 0.2

These are basic settings for this model, also depends on your printer, recommend K1 Max.

Print Flat
Please do not sell my model, if you would like a commercial license you can contact me at
https://www.facebook.com/iPrint3Ddesigns
or my personal profile
https://www.facebook.com/profile.php?id=61551609915138

3D PRINTING SETTINGS

Same Settings as Above
Fuzzy Skin Settings (Optional)
infil - 20%
Fuzzy Skin - Contour
Distance - 0.8
Thickness - 0.2

These are basic settings for this model, also depends on your printer, recommend K1 Max.

Print Flat

HUNGRY EASTER BUNNY | FAST PRINT - DETAILED

0.2mm layer, 2 walls, 15% infill