esign Concept

The model is designed as a decorative illuminated star with a layered structure that combines aesthetics and functionality. Star-shaped cutouts create a soft and even light distribution, while the inner star adds visual depth. The geometry is optimized for easy printing, sufficient stability, and safe use with LED lighting. The design is intended for indoor decorative use, such as window displays or ambient lighting.

Print Settings

Material: PLA

Layer height: 0.10–0.20 mm

Infill: 15–20%

Nozzle: 0.4 mm

Supports: Not required

Adhesion: Brim recommended

Print orientation: Flat on the back side

LED-compatible design (use low-heat LED light sources only).

Assembly Instructions

Insert the LED light or LED string into the inner cavity.

Route the cable carefully through the designated opening (if applicable).

Close or stack the parts according to the design.

Optional: Fix parts with a small amount of glue if a permanent assembly is desired.

Assembly is simple and does not require screws or special tools.

lluminated Star Lighted Star Decorative Star Light

0.2mm layer, 2 walls, 15% infill