This Iron man Ground smash model is made by user3345919229.

It is well detailed Fantastic action model. I have printed its stl file model on scale 31%. The Model required Normal support. I have added Normal Manual Snug support at overhang portion only. also i have activated "make overhang printable" Option for minor overhang portion. It does not affect aesthetics of model. Model will perfectly comes Out at any size with this setting.

I have used the PLA Material.

Material Used: PLA+ White

Print Parameters:

1) Slicer Software : Creality Print 6.0

2) Printer: Ender3 KE.

3) Profile mode: Normal Quality (0.2mm).(Activate make overhang printable -max angle-64).

4) Infill: 15% (Rectilinear Pattern)

4) Scale: 31%

5) Retraction: 2mm minimum.

6) Print Speed: 300mm/s.

7) Printing Temp: 220 0 c.

8) Bed Adhesion: Auto.

9) Support: Normal Manual (Snug)-at Overhang Portion only.

Note: Before printing Make sure Bed is well adhered with glued for perfect first layer.

I didn't find any issue with print. Go ahead with KE.

Hope You like it..!! Thanks for Watching..!! Happy Printing.

Iron man Ground smash

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill