Remix

This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE.

I also have a Multiboard compatible version in my profile.

Printing

0.20 Layer Height

No Supports

10-15% Infill

If you printed the panel and tool holder with ABS - It should be a snug fit.

If you printed the panel and tool holder with PLA - It should be a snug fit.

If you are printing this tool holder in PLA and the panel was printed in ABS - You should compensate for ABS shrinkage by downscaling the PLA print. (I only downscaled to about 99.9%)

Source and Thanks

Credit to the amazing work of @LEOTE_approach Link to the relevant side panel is here:

https://www.crealitycloud.com/model-detail/67bd6fe0e12c694d36625cf3

Credit to @ahmetu for the HWS version. Link is here:

https://www.**********.com/refresh?redirectUrl=%2Fmodel%2F676850-hsw-creality-k1-toolholder

Please leave me a 'LIKE' if you find this remix model useful in any way and please post 'MAKES' - I'd love to see your prints!

Tool Holder for LEOTE_approach's K1/K1C/K1SE Side Panels

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill, K1SE

Original