This Build Plate Holder has been especially designed for Creality K1C build plates but can also be used for the Creality K1 build plates or any other build plate with the dimensions of 235 mm x 235 mm like e.g. Ender 3 V3 SE or Ender 5 S1.

Creality K1C build plates have an attached strip for cleaning the nozzle, which is why these plates are thicker than most others. Because of that I decided to design a special holder for K1C build plates so that this cleaning strip will not be damaged.

Advantages
In addition to a larger distance between the plates, the stand has an ergonomic design that allows you to easily insert or remove the build plates. You can also easily grip the build plates and see in advance what type of plate (e.g. smooth plate, textured PEI plate, a.s.o.) they are.
The K1C Build Plate Holder can be attached without glue, screws or tools. However, if you like to add more stability to the stand you can use instant adhesive to glue the two parts together.

The Build Plate Holder by 2Kperformance has been designed to be printed on your K1C. It was therefore divided into two components.

2 versions included

Two versions of K1C Build Plate Holder by the 2Kperformance are included.

1. The normal version that you can set up and move freely afterwards.
2. A second version which you can screw to the table top, for example, using two 3 mm round-head screws.

Both versions differ only in the file for the left half of the Build Plate Holder. Please select the desired version before printing.

K1C Build Plate Holder freestanding version, no tools needed

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill