Design Concept: This design has 3 plates and 3 objects. Give me a boost if you like it!

Plate 1 – K2 Pro Poop Chute: This chute attaches directly to the back of the K2 Pro using the existing mounting screws. It redirects filament waste to the left side of the printer (the side opposite the spool holder), helping keep your workspace clean and organized.

Plate 2 – K2 Pro Poop Bin: The waste bin is designed to sit on the left side of the printer and collect filament debris exiting through the chute. Its steeply angled bottom funnels the waste toward the front of the bin, making it easy to remove and clean.

Plate 3 – K2 Pro Poop Bin L: The “L” version of the waste bin provides an improved fit for the K2 Pro, ensuring no filament scraps fall onto your table or floor. The slightly angled base directs waste toward the front of the bin for efficient collection and removal.

(Both Poop Bins are NOT needed, just print what works best for your environment.)

Print Settings

Creality K2 Pro with Creality CFS, 0.2 layer height, 15% infill, Creality Hyper PLA (No supports or brims needed.)

Print Times:

Plate 1 – K2 Pro Poop Chute: 3h 21m

Plate 2 – K2 Pro Poop Bin: 5h 30m

Plate 3 – K2 Pro Poop Bin L: 4h 31m

Assembly

The only thing needing assembly is Plate 1: K2 Pro Poop Chute. It is designed to use the 2 existing screws on the back of the printer. Simply remove screws by using Creality K2 Pro took kit, align screw holes, and re-secure the screws.

K2 Pro Waste (Poop) Chute and Bins

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill