Hi friends, we created this simple kitchen organizer that is very simple to print.

it is composed of the base, which is easily printed without supports. and the lid that fits into the base, so you can open it more easily.

You only need supports for the lid.

it is about 12 CM in diameter, quite large, but you can resize it and print it to the size you need.

It uses approximately 150 g of material

We printed it with our bambulab p1s with red and blue PLA filament from the same brand.

I hope it is useful to you.

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print.

We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy.

Thank you very much.

With love, Marina from Shack3d_print.

3D PRINTING SETTINGS

Printed with Bambulab p1s

Slicer: bambustudio

Filament: pla bambu red/ blu

Temp: 220°C

Infill: 10%

Support: yes only for the lid

Layer height: 0.2

Nozzle: 0.4

Top/Bottom: 3

KITCHEN ORGANIZER

0.2mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15 infill