Design Concept

The landscaping fence is designed to enhance the aesthetic appeal of gardens or yards, providing a quaint and charming boundary for plants or small designated areas. My wife was happy with my wine barrel planters (the smallest of the three is shown in one of the pictures here) so she commissioned a landscaping fence. She wanted a white fence but settled for a translucent fence. (it's what I had a lot of). I designed all the parts in Fusion 360 to get the screw holes all in the right places and sizes to be correct.

I had planned on designing an anchor but ended up just using some stakes and screwing the post to them (see picture). Another short cut was the color of the screws and sizes. I used black but kind of regret it. It turned out OK though. I used some screws that were too long as well as I couldn't find the size i needed.

Purpose

It serves as a decorative divider in landscaping projects, useful for segmentation, focus on plant collections, or greener landscaping resolutions.

Printing Recommendations

To start-sorry you need at least a 350x350 bed plate as some pieces are diagonally at 430mm.

I know we normally shouldn't duplicate pieces but this is so complex that it just made sense to show all the necessary pieces. I didn't print this as it is setup here, I printed one piece at a time over several weeks (months). A couple of hours or less for each piece. I sometimes grouped many pieces and let it print overnight. Once I got bed adhesion working with glue, it printed without issue.

Utilize a durable material like PETG to withstand elements exposed outdoors. Monitor the adhesion carefully during the printing process, using moderate infill to ensure durability without compromising design details.

Assembly Instructions

See attached instructions and pictures. The model is meant to be printed in multiple sections that can be easily attached with M4mm screws. Anchor points may need to be added during installation to secure the fence into the ground firmly.

Landscaping Fence-3D printed

0.28mm layer, 2 walls, 10% infill