Downloadable STL file that can be directly input into your slicer.

Instructions:

1. Import all files (except base) by selecting all and dragging them into slicer.

2. Elect to bring all files in as a single part with different objects.

3. Select which object gets which color (White, Purple, Yellow)

*Highly suggest printing light colors first.

4. Lay on the face and adjust your front profile settings that best suits your printer.

5. Do the same for the base but do not lay on face. Allow it to print from the bottom up.

6. Print the Back in a separate print.

Print settings to consider:

Flow Ratio - .98 up to 1.04

Wall Generator set to - Arachne

Only one wall on top surface (enable)

Infill/Wall overlap - 25%

The back plate includes a 3.2mm hole for a power cord to slip through. I use an SP105E controller for the LEDs. Sodder the connection directly in and utilize Bluetooth to control the lights or add a (drilled) switch.

On a K2 plus 340mmx340mmx340mm plate this costs roughly $4 in filament to make. Enjoy!

Please reach out if you have custom projects you need work on!

LSU Legacy Logo - Lightbox