Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.9x150.9mm in size

You may print at higher layer heights below the Base Thickness of 0.56mm

The Max allowed Thickness is 1.06mm and the Actual Thickness is 1.05973mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Ivory White for the rest.

Design Concept

This 3D printed image features Luigi, a beloved character, rendered beautifully in grayscale, capturing a mysterious ambiance of adventure in a forest setting.

Usage

This piece can serve as a wall picture or decorative plaque emphasizing artistic imagery combined with recognizable gaming culture elements.

Printing Suggestions

Consider adjusting the grayscale contrast to enhance depth perception. Utilize fine resolution settings to capture intricate details more effectively.

Assembly Instructions

No assembly required; ready for display immediately after printing.

Luigi HueForge

0.08mm layer, 3 walls, 100% infill

0.2mm layer, 2 walls, 15% infill