-The Thing No One Asked For But I Needed-

The idea behind the fan modification was to rapid cool a build plate to decrease warping from trying to pull 3D prints before fully cooled. Mostly for testing fitments or sizing were I only print a small part of a model to test and may warp with most of the model missing to support something like a ring structure for example. I also embedded my previous model for this competition (not required) but can double as an air filter for the fan mod to reduce the dust and contaminants in your 3D printing space, can also help reduce depositing dust on sticky build plates.

-Print Setting-

Adventurer 5m, 11 Hours Print Time

Tree Supports (35 Degree angle for the large core) may not be needed

Normal Tree Supports on other parts

-Assembly-

Its all interlocking aside from the top cap which uses alignment pegs to friction fit and glue if required.

Magnets- 5mm round and 3mm tall

Fan- Bauer Battery Powered Portable Fan (I like you can plug it in also.)

Magnetic Build Plate Cooling Fan (Vac Filter Compatible)

0.2mm layer, 3 walls, 15% infill