A fan-made logo magnet inspired by MasterChef 🔥👨🍳

This model features the standalone logo design with no background, giving it a clean floating appearance when placed on a fridge, wall, or display surface. ✨

Printed in orange PLA 🧡 for a bold and recognizable kitchen-themed look.

The 3MF file includes all 3 versions of the model:

• 3-Magnet Version – requires 3 magnets, size 8×2 mm 🧲🧲🧲
• 1-Magnet Version – requires 1 magnet, size 8×2 mm 🧲
• Solid Version – no magnet slots 🧱

Simply open the 3MF file and choose the version you want to print.

Perfect for:
• Fridge decoration 🧊
• Kitchen wall accent
• Gift for cooking lovers 🎁
• Fan collectible 🔥

📏 Model Dimensions

• Approximately 188.3 × 200.2 × 5.0 mm

⚙️ Print Settings

• Layer height: 0.20 mm

• Infill pattern: Gyroid

• Infill density: 15%

• Wall loops: 3

• Material: PLA – orange 🧡

• Supports: No supports required ❌

Print face-down to achieve the best front surface quality. 👍

🧲 Assembly

For the magnet versions, insert the 8×2 mm neodymium magnet(s) into the rear slot(s) after printing.

• 3-Magnet Version – insert three 8×2 mm magnets
• 1-Magnet Version – insert one 8×2 mm magnet

Secure each magnet in place with a small drop of glue. 🧴

For a slightly raised fit that creates a small gap from the surface it attaches to, such as a refrigerator, you may use 8×3 mm magnets instead. 📏

For the Solid Version, no magnets or assembly are required. ✅

Enjoy printing! 🎯

MasterChef Logo Magnet Pack 🧲

🔥 All Versions Included | 0.2mm layer, 3 walls, 15% infill