MRC Laptop Stand - Creality Edition

1. Product Overview

This upgraded version of the MRC Adjustable Laptop Stand features an enhanced design with integrated Creality Logo detailing, combining sleek aesthetics with practical ergonomics. Optimized for 3D printing, the stand offers sturdy support and customizable tilt angles to elevate your laptop or tablet, reduce neck strain, and improve airflow for better heat dissipation. It’s ideal for office, study, or entertainment use.

2. Recommended Print Settings

To ensure premium finish and strength, we recommend using Creality Hyper PLA (CrealityHI) filament:

Material: Creality Hyper PLA

Layer Height: 0.2 mm

Infill: 10–15%

Nozzle Temp: 200–220 °C (recommended by CrealityHI)

Bed Temp: 50–60 °C

CrealityHI offers excellent layer adhesion, smooth surface finish, and high-speed printing compatibility, making it ideal for this modular structure.

3. Hardware List

No. Part Specification Qty

1 Heat-Set Insert Ø3 mm (inner) × 3 mm (height) × 4 mm (outer) 4

2 M3 Cross-Head Screw Ø3 mm × 12 mm 4

4. Assembly Instructions

① Heat-Set Insert Installation

Secure the printed part on a stable surface. Using a soldering iron or heat gun, insert the 3×3×4 mm heat-set inserts into the designated cavities until they are flush with the surface.

② Support Arm Installation

Align the support arm with the rotating slot, insert the hinge pin, and confirm it moves freely.

③ Screw Fixing

Pass the M3 × 12 mm screws through the base holes of the support arm into the heat-set inserts. Tighten securely but avoid over-tightening to protect the part integrity.

④ Functional Test

Adjust the tilt angle and ensure the mechanism locks firmly with no wobble before placing your device.

🎉 Print with confidence, build with pride — powered by Creality!

Enjoy your upgraded MRC stand with faster print times and a premium surface finish using CrealityHI filament.

MRC Laptop Stand - Creality Edition

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill

Original