🐶👼 Design Concept

This multicolor Dog Angel magnet represents my beloved dog as a Valentine angel holding Cupid’s bow and heart-tipped arrow. The design combines emotional symbolism with clean multicolor separation, allowing precise details while maintaining smooth, printable geometry.

💘 Purpose

Designed as a functional refrigerator magnet, this piece serves both decorative and practical purposes. It is ideal as a Valentine’s decoration, a personal keepsake, or a thoughtful gift for dog lovers.

📏 Model dimensions

• Approximately 26.5 × 30.5 × 3.0 mm

🖨️ Printing Recommendations

• Print face-down to achieve the best front surface quality

• Use a 0.4 mm nozzle with 0.16–0.20 mm layer height

• 50% infill recommended for strength

• No supports required

• PLA recommended

• Multicolor setup (4 colors) 🎨: Red, Black, Peach Fuzz, Brown

🧲 Assembly Instructions

After printing, insert a 10 × 2 mm neodymium magnet into the rear slot (designed with a small tolerance for easy insertion).

Secure the magnet in place with a small drop of glue. 🧴

For a slightly raised fit that creates a small gap from the surface it attaches to (e.g., a refrigerator), you may use a 10 × 3 mm magnet instead. 📏

No additional assembly required.✅

Enjoy printing! 🎯

🌐 Created by MakeNow's SnapForm (https://makenow.crealitycloud.com)

🐶👼 Multicolor Dog Angel Valentine Magnet 💘

0.16mm layer, 3 walls, 50% infill