Okay, I know what you’re thinking. And yes, I thought the same. But trust me, it’s not that kind of pinecone.

This is a stylish Christmas ornament, not something you hide in a drawer.

If your mind still goes there, fine… open your slicer, trim the base, and voilà — secret kept between you and your printer. 🎅😏

For everyone else, it’s just what it looks like: a refined decorative piece with a touch of gothic flair and elegant metallic inlays — perfect to complete your festive set.

Christmas is supposed to be the season of kindness… or so the cookie ads say.

So, to avoid looking like a Grinch with a 3D printer, I’ve prepared pre-colored 3MF files for you.

Still, I swear by acrylic paints: more artisanal, more satisfying, and — bonus — no mountains of plastic leftovers.

But if you’re on Team “multicolor without a brush,” go ahead — files are ready to print.

Don’t say I never spoil you.

⚙ Print settings

Model height: 10 cm

Printing technology: FDM

Material: PLA

Layer height: 0.16 mm

PLA used: ~460 g

Printing time: ~24 h

Extra tips: 10% infill • supports for the star and leaves • light brim (and no, the shape wasn’t intentional… probably)

Fuzzy skin finish: optional, 0.2 mm, for those who like a rougher touch

🖌 Painting & finishing tips

Print it directly in white PLA.

Then highlight only the reliefs and inlays using metallic acrylics.

Base color: leave the print as-is — no need to paint the body.

Details: apply gold, silver, or bronze acrylics to the raised decorations.

Shading: a soft brown wash adds depth and contrast.

Final coat: use matte varnish to seal everything and keep a refined look.

If this pinecone had feelings, it would’ve blushed halfway through printing 😏

The Naughty Pinecone #1

0.16mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill